Descripción del producto

XY leading edge feeding full auto die-cutting machine(with computer )
Uses and features :
1. It adopts PLC controls , perfect protection function . Reliable control
2. LCD touch screen can make the human and machine talk directly
3. Soft roller repair structure , it can improve rubber using rate , it can repair **4times
4. Compensate automatically with limited speed and ensure the size of die-cutting is consistent
5. The die-cutting roller is alloy steel in high quality , wall thickness is *0mm , balanced correction and hard chrome
6. Wall plate is excellent cast iron , thickness is *0mm . It is made by large processing center
7. The polyurethane rubber pad is from American CUE , install conveniently , it can die-cutting *******0 times
8. Soft roller can be moved right and left *0mm automatically , rubber wore is even
9. Six grades is excellent grinding , it adopts *0Cr material .low noise and long using life
*0. Die-cutting roller is with auto separate device and reduce rubber wearing
*1. It adopts advanced leading edge system , high feeding precision , fast speed , feeding wheel is using life , the speed can be up to ****0pcs/hour , precision is ±0.5mm
*2. The blowing rate can be controlled
*3. The phase is controlled by computer and **0°phase adjustment , fast and accurate
*4. Ahead guard is adjusted manually , side guard is adjusted by computer 

XY***0/**0/**0 series rotary slotting machine
XY***0/**0/**0 type circle pressure round soft rolls die-cutting machine
Main features
Whole machine introduction
 1、 It adopts press line in ahead and slotting in behind ,it is convenient to clean scraps of paper and adjust and change fast
2、 Phase adjustment electrically ,it is adjusted **0°digitally and  it show on the dial ,it is adjustable when working and stop and improve working efficiency   
3、Slotting and cutting part:
A、The adjustment for knife seat of slotting
Before the cardboard go in knife seat , to make sure the axial distance between knife seat ,    
 
B、Install the slotting and cutting knife
    To make the cutter head consistently , it has two knifes on the cutter head , one is fixed on sign "0" , the other to adjust axial position as to box height , the head of blade need to be opposite and towards center of cardboard
 
C、Install cutting knife
     The knife seat is installed on the cutter head . First ,open the fixed bolt , adjust driving shaft manually , check knife installation is suitable or not , finally fixed bolt
4、Cutting and creasing part
Cutting knife and creasing module is installed on the upper and lower shaft , to make sure the distance and position as to cardboard specification and then fix knife seat and the iron wire on the module
5、Counter device automatically and can control production amount
 Technical parameter